Piano string or some may refer it as piano wire, is the wire used for the internal strings of a piano. Piano strings are commonly made of metals and alloys such as aluminum, brass, copper, or stainless steel. The thickness of piano wire can range from 24 gauge, or 0.022 inches (0.5mm), to 6 gauge, or 0.192 inches (4.8mm).
Replacing a piano wire is not a difficult task, but for a layperson it can be a dangerous task. It is recommended that one hire a professional if your piano needs some work. On virtually all pianos, replacement involves loosening the two tuning pins which hold the length of wire in place — this is done by turning the pins approximately four full turns each, alternating between them. Once loosened, the length of wire is loosened from the pin, and removed entirely. This may require some cutting, depending on how securely the piano wire is attached. The removed wire is then measured against the new length of wire (adding some length for any that was broken off during removal), and cut. The new wire is then connected by tying it to the tuning pins, which are then turned four full turns to clamp the new wire in place. The final task is making sure the string is properly tuned, which is done by trial and error and turning the pins ever-so-slightly. Properly tuning a piano can be a difficult task, and is usually best achieved with the help of a professional.
Replacing a piano wire is not a difficult task, but for a layperson it can be a dangerous task. It is recommended that one hire a professional if your piano needs some work. On virtually all pianos, replacement involves loosening the two tuning pins which hold the length of wire in place — this is done by turning the pins approximately four full turns each, alternating between them. Once loosened, the length of wire is loosened from the pin, and removed entirely. This may require some cutting, depending on how securely the piano wire is attached. The removed wire is then measured against the new length of wire (adding some length for any that was broken off during removal), and cut. The new wire is then connected by tying it to the tuning pins, which are then turned four full turns to clamp the new wire in place. The final task is making sure the string is properly tuned, which is done by trial and error and turning the pins ever-so-slightly. Properly tuning a piano can be a difficult task, and is usually best achieved with the help of a professional.
